Alloy wheels wholesale provider in China

Alloy wheel wholesale manufacturer by Jjjwheel? Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Find even more info on alloy wheels supplier.

Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.

Changeable fashion styles are more suitable for the requirements of modern vehicles: The style is easy to change arbitrarily: using casting to make aluminum wheels, any spatial surface and shape can be made to match different models and meet the requirements of different users. The status of “green leaves lined with safflower” is becoming more and more prominent, and aluminum wheels have become the echo products of modern automobile fashion. It is not easy to hide dirt and dirt, does not produce rust, is easy to clean, and is widely loved by drivers.

The main advantages of pure electric vehicles are that the electricity bill is cheap and the cost of car maintenance is low. For users with a small radius of daily activities, such as home travel and commuting to get off work, the advantages are obvious. Similarly, for the urban population with limited numbers and licenses It’s also a good choice. As for hybrid models like gasoline and electric vehicles, the essence is still fuel vehicles. Electricity mainly plays an auxiliary role when starting and accelerating, and it is very important for energy saving and emission reduction.

One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.

Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. See additional details on https://www.jjjwheel.com/.