Tenant services and data cabling company today: Apartment Building Security System Installation: Before installing smart locks, access control points, and security cameras, you need to consider a number of factors specific to your building such as the types of common space, number of entrances/exits, resident turnover, and number of units. Wireless alarm systems are easy to install because there are no wires to worry about. However, you still need to pay attention to where you place them so that they do not interfere with other electrical devices. Also, check the WiFi strength. The further your cameras or alarms get from the router, the more likely you are to have a signal problem.
We fully design and install server rooms. We work with your I.T. team on what your data needs are and pair the correct mount/rack/cabinet that can house the network equipment. Necessary entry points to the server room have conduits stubbed in and the necessary trays/baskets are mounted to direct the data cables in the right direction. Post racks and cabinets are leveled and floor mounted. While wall racks are mounted securely along with a plywood sheet attached to wall stubs. We ensure that all equipment is safely and securely mounted, where there is no chance in any equipment tipping or falling. Patch panels, cable managers, cable covers, and other organizers are installed along with the mount/rack/cabinet.
Since the pandemic, the insecurities of outdated access control technology and systems have increasingly become a concern. In order to increase safety and mitigate the current health crisis, touchless access control technology is taking the lead not only in security but in physical health as well. Companies like tenantservicesteam.com are offering all-in-one access control solutions that provide the modern features necessary to increase building security and tenant experience. The concept of smart buildings has been around for a long time, but it’s growing in demand because of the current environment. Ultimately, implementing new access control technologies can lead to satisfied tenants, increased tenancy rates, and decreased turnover.Discover more details at security monitoring.
Tenant Services Team can assist in any type of project including: new constructions, office buildings, lighting design, service upgrades, any type of data cabling, and much more. As a full service commercial electrical contractor, our range of services can provide any solution for your electrical needs, such as: Cabling for CAT5, CAT5e, CAT6, CAT6A, CAT7; Outside building cable (copper and fiber); Different types of Audio / Video cabling; All types of low voltage wiring; and much more!
Network relocation is the process of moving your information technology infrastructure from one place to another. There are a number of reasons why you may need a service like this. If you’ve outgrown your current office space and are looking to expand somewhere new, you’ll need to move the existing technology to your new location. Perhaps you’re simply one cog in the overall corporate relocation and are tasked with the process of moving the IT infrastructure.
The moving procedure is a fine art at Tenant Services Team. We handle the whole process from start to finish, letting you attend to your own business. Following our well-proven and fully documented procedure, we safely shutdown the current network – ensuring no data is lost or equipment is damaged – then have it setup for the next steps. Regardless of the property you’re at, your basic security provisions must include the ability to control who enters and when. An access control system acts as your own electronic gatekeeper, allowing for the free flow of authorised personnel, guests, and residents while denying entry to unwanted visitors.
The cable trays that extend from the ceiling should be large enough to so that cables are not crushed. Overloaded cable trays can also become too heavy and pose a danger if they fall from the ceiling. Unused cables should be removed, rather than trimmed at both ends and left in the tray. It never hurts to take an inventory of all overhead cables at least once a year and make sure any abandoned cables are removed. Overhead cable trays are expensive to install but can make organizing your data center a lot easier. One thing I noticed at Microsoft was that if the cable trays were installed within reach of employees, they tended to fill up with cables that didn’t belong in the trays such as loose power and KVM cables. An overloaded tray can also result in cables near the bottom being crushed, which will mean a degradation in signal. Discover extra details at https://tenantservicesteam.com/.
In the days leading up to the move, we coordinate the wiring of the new space and any other elements that can be put in ahead of time. This includes ordering any new equipment in a timely manner so that it is available and ready on move day. We then arrange for transportation services for your automated systems, using both our staff and our trusted partners. This includes plans to dispose of and donate equipment that is no longer needed. On moving day(s), our Network Engineers and Project Management staff coordinate all systems transport; automated systems are properly shut down, labeled, tagged and bagged. Everything is then set up at the new site and old equipment is disposed of.