Best EBS wax manufacturer and supplier? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Read more info on ethylene bis-stearamide.
Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.
Intermediate content of 10-12%, mainly used for powder coating treatment and increase capacity flow. In the grinding pigment (filling) process of producing pigments and inks, a metering coupling agent can be directly input, which can improve the dispersibility of the pigment or filler, shorten the grinding time, increase fineness, brightness, and reduce viscosity. Atactic polypropylene is effectively solve the problem of high filling system debris, improve the toughness of products, can replace the use of carrier, but also can replace the use of lubrication. Atactic polypropylene is used in filler masterbatch, etc Read additional information at https://www.sainuowax.com/.
Plastic additives can generally be divided into two categories. Namely: process additives and functional additives. The main function of the former is to help the smooth implementation of the processing process and improve the smoothness of process operation. Such additives include antioxidant, lubricant, coupling agent, release agent, etc; The latter can endow or improve the specific application performance of products. Representative additives include plasticizer, light stabilizer, UV absorber, antistatic agent, flame retardant, nucleating agent, antibacterial agent, etc.
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.