Double planer machine factory in China: Pressure generated by machine presses: Machine presses rely on high pressure to perform their intended applications. Heavy duty presses use around 1 to 30 tons of pressure. As a result, they are able to reshape most materials, including bronze, copper, aluminium, iron, steel, wood and composites. The high pressure of a press squashes even the hardest metals, allowing manufacturing companies to reshape wood or metal work-pieces into their desired shape. Through-feed presses are those where the introduction of panels between the plates and their extraction are fully automated in order to reduce the working cycle and manpower costs. Discover even more information at 2 sided planer.
The band saw is great for freehand and curved cutting, but its depth of cut also makes it suitable for sawing thick timber. The table tilts on many models allowing for angled cuts. Band saws come in many sizes suitable for the homework shop and a professional workshop. A band saw is capable of cutting wood, plastic composites and insulation. Most workshops are going to have a band saw because they are so versatile. They cut curves, shapes and deep ripping (cutting a board lengthwise or parallel to the grain). Designed to accurately cut large sheets of MDF, MFC, wood, chipboard, composites and plastics. They have a sliding table next to the saw blade, moving the material passed the blade while fully supported. They can also include a secondary scoring saw blade which scores the lower surface in order to reduce breaks/splits/tears on the underside.
A typical hydraulic down-acting press uses a pair of hydraulic cylinders, one on each end, to generate the tonnage required for the down stroke of the machine. Traditionally, these machines have a C or O frame profile design. With both types, when facing the front of the machine the hydraulic cylinders are located on the left and right hand side of the upper beam. Since the upper beam is being pushed down and up with hydraulic power, the upper beam will fall during a power outage and could create an unsafe environment. Down acting presses are commonly blocked at night to take pressure off of the hydraulic system. The lower beam does not move during bending so the operator will not get feedback that the brake is engaged.
A jointer is used for planing straight edges and surfaces of boards. In practice, it performs the work of a hand planer and is capable of producing a true surface with sufficient accuracy and speed. In consists of a frame, table, feed rollers, revolving head fitted with two or three cutter knives. With the help of feed rolls, the plank is fed to the cutter head which removes the wooden chips as the board advances and makes its surface smooth and plane. By means of an adjustable fence, the jointer can also be used for angular and level cuts. A jointer is specified by the length of the cutting blade.
Probably the second most important of single woodworking machines in a carpentry shop is the circular saw. It can be used for ripping, cross cutting, mitering, beveling, rabbeting, and grooving. Although there are many types of circular saws such as universal saw, variety saw, bench saw, the basic working parts are common to all. Each has a flat surface or table upon which the work rests while being cut, a circular cutting blade, cut-off guide, and a ripping fence that acts as a guide while sawing along the grains of the wood. The circular saw usually has provisions for tilting the table upto an angle of 45° to enable the machine to cut at different angles required during mitering, levelling, etc. The size of a circular saw is determined by the diameter of the saw blade.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. See more details on https://www.v-holdmachinery.com/.
Founded in 1996, V-HOLD have more than 20 years of professional four-sided plane production, to create China’s four-sided plane first brand and commits itself to provide the most secure, reliable, efficient, energy-saving, economical production equipment for the customers around the world. Nowadays, most of the products including 4-Side Moulder, Multiple Rip Saw, Multiple Rip Saw with Double Side Planner, and Automotive Floor Production Line have passed ISO9001: 2000 quality system.