Excellent cylindrical roller manufacturer and supplier

Cylindrical roller bearing producer from jnsnbearing.com: Depending on the series as defined below a number of cylindrical bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other which can be used as free-end bearings. Pressed steel (with or without tins or fins) or machined brass cages are generally used, but sometimes molded polyamide cages are also available depending on the application. Cylindrical Roller Bearings are also available without cages with a full complement of rollers. This allows even higher loads but at the expense of speed. HK, and HK-RS Series – Drawn cup needle roller bearing, Open ends for through shafts, cage guided, with/without seals, Metric dimensional. HF Series–It is made of pressed outer ring and plastic holder; the holder can be installed with plastic reed or the stainless steel reed to guide the needle rollers, bevel race way and needle rollers can be treated as locking device. BCE and BCE-P Series – Drawn cup needle roller bearing, One end closed for shaft ends, cage guided, with/without seals, Inch dimensional Discover additional information at https://www.jnsnbearing.com/needle-roller-bearing.html.

The HF series is composed of one-way bearings, and they are consisting of a drawn cup roller clutch with a single or multiple rollers. The models of this series come with different bore sizes that ranges from 6 mm up to 35 mm. The drawn cup needle roller clutch of these bearings has a small radial section height and is also popular with the name of One Way Bearing or Anti-Reverse Bearing. Furthermore, these one way bearings are specifically designed for the transmission of torque between the shaft and housing in one direction. In addition, bearings with plastic springs have the suffix KF, and suffix R refers to knurled outside surface.

These bearings are separable bearings, and convenient to be mounted and dismounted. They are designed as types of single, double and multiple rows among which the single row cylindrical roller bearings are most applicable. Normally these bearings can accommodate radial load only, none but single row bearings with ribs both on inner and outer rings can carry lighter constant axial load. Application – They are mainly used in large and medium-sized motors, rolling stock, machine tool spindles, internal combustion engines, generators, gas turbines, gearboxes, rolling mills, vibrating screens, lifting and transport machinery, etc. Cylindrical roller bearings are the right choice for high speeds and heavy radial loads. They are produced in different inner ring designs for easy dismounting.

In office automation tools, the office environment requires bearings to have good features such as low noise, high temperature resistance, and low starting torque. The copier also puts forward higher requirements on the electrical conductivity of the bearing. Because these bearings are usually miniature bearings, and most of them are thin-walled series, and some require flanged design, higher requirements are placed on the manufacturing process and equipment accuracy. In medical equipment, low rotational torque, low noise, and good flexibility are the basic requirements for bearings, and the safety characteristics of bearing materials, the safety characteristics of bearing grease, the anti-rust performance of bearings, and the service life of bearings are all under consideration. In the range. Find additional info at jnsnbearing.com.

Deep groove ball bearings can be used in generators, small motors, electric fans, power tools, vacuum cleaners, conveyor, packaging machine, drilling machine, conveyor, variable, washing machine, optical instruments and so on. Single row radial ball bearing 6200 series are available in Metric and Inches, and there are three seal types reachable– rubber seals, metal shields, or just open. Also we have several material options for the bearing, plastic, chrome steel, stainless steel, ceramic, carbon steel and etc. This series features deep-honed raceways resulting in a perfectly balanced bearing. For 6200 series of deep groove ball bearing, its structure is simple and easy to use, it consists of four elements that including inner ring, outer ring, cage that holds balls and ball bearing. It is mainly used to bear radial load, but when it increases the radial clearance of the bearing, it has certain angular contact ball bearing performance and can withstand combined radial and axial loads. It can also be used to withstand pure axial loads when the rotational speed is high and thrust ball bearings are not suitable. Compared with other types of bearings of the same size as deep groove ball bearings, these bearings have a small coefficient of friction and a high limit speed.

The company has rich experience in the industry of bearing production and export. We focus on not only the domestic market, but also the international market. Moreover we integrate R&D, production and export of bearings. We constantly strive for research and innovation development, adhere to the concept of “survival of high quality”, and provide excellent service for customers. Our employees receive professional training. Our competence to work out a proposal that springs a “before vs after” clear your worries. Our concept of “ survival of high quality” urges us to attach great importance to our products quality and price, thus we have absolute strengths on them.

These bearings have a higher radial load capacity than deep groove ball bearings without filling slots, though their axial load capacity is lower. They cannot be used at speeds as high as bearings without filling slots. Both open (unsealed) and sealed versions of the single-row deep groove ball bearings with filling slots are available. They are also available with a ring groove on the outer race and with (NR) or without (N) a matching locking ring. The full complement deep groove ball bearings are widely used in aerospace engineering, metal cutting machine tools, steel processing equipment,paper making machinery, cement machinery, environmental protection equipment, agriculture, compressors, motors and generators, construction and so on.

The diversity of thin wall ball bearings makes them suitable for a wide range of applications, such as aerospace, semiconductor processing equipment, robotics, medical equipment and other fields. F6700 series is a deep groove ball bearing with a flange on one side of the outer ring. When using this bearing, it is not necessary to provide a step on the inner bore of the housing, so it is possible to process the through hole with high accuracy. Since this bearing is attached to the end face of the housing as a standard, it is necessary to machine the right angle of the housing end face with high accuracy. Single-row flanged deep groove ball bearings F6700 series are available in open and sealed designs. They are designed for high to very high speeds and can accommodate radial as well as axial forces. Flanged bearings are recommended when housing designs cannot accommodate full bearing width, or where the quality of the housing bore is a concern. Moreover, because of their simple design, low operating temperature, and low friction, flanged deep groove ball bearings have a longer expected shelf life than other bearings. They do not require additional lubrication after installation, which also means less maintenance downtime.